Pressure, Sound & Temperature Probes

Accurate readings start with the right probe. Our range of pressure, sound and temperature probes covers the measurements HVAC technicians take on every job, from refrigerant pressures and line temperatures to static pressure, airflow, humidity and noise. Use a Bluetooth manometer to check duct static or gas pressure from your phone, clip on a pipe clamp probe or HVAC thermometer to work out superheat and subcooling, or choose a manometer kit that packs the instrument and accessories for air-side testing into one case.

We stock leading brands including Fieldpiece and Testo, whose app-connected systems let you log, share and report results straight from site. For quick spot checks, a handheld digital thermometer for HVAC work, an infrared thermometer or a sound level meter is often all you need. Whether you're building a starter kit or expanding a wireless setup you already own, you'll find the probes to match here.

Filter and sort 27 products
Sort by
If you can't see what you need, we can help you.

Bluetooth Manometers and Wireless Pressure Probes

A Bluetooth manometer replaces the old liquid U-tube and analogue gauge with a compact digital instrument that sends readings straight to your phone or tablet. HVAC technicians use them to measure total external static pressure across ducted systems, check filter and coil pressure drop, and confirm gas pressure at appliances. Because the readings appear in an app, you can place the manometer at the air handler and watch the numbers from the return grille or the roof space without running back and forth. Wireless refrigerant pressure probes work on the same principle, screwing directly onto service ports to log suction and discharge pressures, which makes them a lightweight complement to a full set of digital manifold gauges. If you're starting from scratch, a manometer kit is usually better value than buying parts separately, as it bundles the instrument with hoses, static pressure tips and a carry case.

HVAC Thermometers for Superheat, Subcooling and Diagnostics

Temperature is the other half of every refrigerant diagnosis. Pair a pipe clamp probe with a pressure reading and you can calculate superheat and subcooling to confirm the charge is right, rather than relying on pressures alone. Clamp probes suit suction and liquid lines, while large pipe clamp versions fit the bigger copper found on commercial systems. A dual-input digital thermometer for HVAC lets you read two points at once, such as supply and return air for a quick temperature split, or both sides of a heat exchanger. Infrared thermometers are ideal for non-contact checks on motors, compressors, electrical connections and surfaces that are hard to reach, but they measure surface temperature only and can be thrown off by shiny copper or insulation. Used alongside a clamp meter, an infrared reading is a quick way to find an overheating compressor or a loose terminal. For refrigerant work, a contact probe is the more reliable choice. Many technicians carry both, and some 2-way HVAC thermometers combine an infrared sensor and a probe in a single tool.

Psychrometers, Anemometers and Air-Side Testing

Air-side measurements tell you whether a system is actually delivering comfort, not just running. A psychrometer measures dry bulb and wet bulb temperature, relative humidity and dew point, which you need to calculate target superheat, check latent capacity and diagnose humidity complaints. In-duct psychrometers can be inserted through a small test hole to take readings inside supply and return ducts. Vane and hot-wire anemometers measure air velocity at grilles and in ductwork; multiply by the free area to estimate airflow and check that each room is getting its share during commissioning or air balancing. Many of these probes now connect to the same app as your pressure and temperature probes, so readings can be combined into one report for the customer or your records. Together they round out a kit of HVAC test instruments that covers both the refrigerant circuit and the air it conditions.

Sound Level Meters for Outdoor Unit Noise Checks

Noise is one of the most common complaints about air conditioners and heat pumps, particularly outdoor units mounted near bedrooms, boundaries or neighbouring windows. A digital sound level meter gives you an objective decibel reading so you can compare a unit against the manufacturer's published figures, check whether a fan or compressor has become louder over time, and document results before and after a repair. In Australia, noise from residential air conditioners is regulated at state and local council level, with rules that can vary by time of day, so a baseline reading taken at installation is a useful reference if a neighbour later raises a concern. For general site checks, an entry-level meter with an A-weighted scale and a 30–130 dB range covers most residential and light commercial work. Take readings at a consistent distance and note background noise so your measurements can be compared fairly.


FAQ of Pressure, Sound & Temperature Probes

What is a Bluetooth manometer used for in HVAC?

A Bluetooth manometer measures differential pressure and sends the readings to a smartphone app. In HVAC work it's mainly used to measure total external static pressure on ducted systems, check pressure drop across filters and coils, and verify gas pressure. Wireless readings let you move around the system while monitoring results, and many apps can log data and create job reports.

Which HVAC thermometer is best for measuring superheat and subcooling?

A pipe clamp temperature probe is the best choice, because it measures the line temperature directly and holds a stable reading. To calculate superheat and subcooling, you combine that line temperature with a pressure reading from a probe or digital manifold. Wireless clamp probes that connect to the same app as your pressure probes can do the calculation for you automatically.

Should I buy a manometer kit or individual probes?

If you're setting up from scratch, a kit is usually better value and makes sure you have the hoses, tips and carry case you need on day one. If you already own part of a wireless system, buying individual probes lets you add only the measurements you're missing, such as an extra pressure probe or a psychrometer.

Can I mix wireless probes from different brands?

Generally, no. Most wireless probes are designed to work within their own manufacturer's app and ecosystem, so Fieldpiece probes pair with Fieldpiece apps and Testo probes with Testo apps. For the smoothest experience and combined reports, it's best to build your kit within one system. If you're unsure about compatibility, contact our team before ordering.

Infrared or contact: which digital thermometer is better for HVAC work?

Each has its place. Contact probes and pipe clamps give the most accurate readings for refrigerant lines, supply air and return air. Infrared thermometers are faster for non-contact checks on motors, electrical terminals and hard-to-reach surfaces, but reflective copper and insulation can affect their accuracy. Many technicians carry both, or choose a 2-way thermometer that combines the two.