Fluke 376 FC True-RMS Clamp Meter – 1000A AC/DC, 1000V with iFlex®

The Fluke 376 FC True-RMS Clamp Meter with iFlex® is designed for professional electricians, HVAC technicians and industrial maintenance teams who need a powerful clamp meter for demanding electrical troubleshooting. With AC/DC current measurement up to 999.9A through the jaw and AC current measurement up to 2500A using the included iFlex® flexible current probe, it is ideal for high-current testing, motor diagnostics, switchboards, control panels and industrial service work.

Built with Fluke Connect® wireless capability, the 376 FC allows users to remotely log, trend and monitor measurements from a compatible smart device. This helps technicians capture intermittent faults, monitor readings over time and work at a safer distance from live electrical equipment where suitable procedures are followed.

The Fluke 376 FC measures AC/DC voltage up to 1000V, resistance, continuity, frequency, capacitance and 500mV DC. It also includes Min/Max/Avg and Inrush recording, plus a VFD low-pass filter for more accurate measurements on non-linear signals such as adjustable speed drives, electronic ballasts and motor circuits.

Set Includes

• 1 x Fluke 376 FC True-RMS Clamp Meter

• 1 x 18-inch iFlex® flexible current probe

• 1 x TPAK magnetic hanging strap

• 1 x TL75 test lead set

• 2 x AA batteries installed

• 1 x Soft carrying case

• 1 x Coated instruction card

• 1 x Safety information sheet

Key Features

• Professional True-RMS AC/DC clamp meter with Fluke Connect® wireless capability

• Measures AC and DC current up to 999.9A through the clamp jaw

• Included iFlex® flexible current probe expands AC current measurement up to 2500A

• Measures AC and DC voltage up to 1000V

• Measures resistance up to 60kΩ with continuity detection

• Measures capacitance up to 1000µF

• Measures frequency up to 500Hz using the jaw or iFlex® probe

• 500mV DC range for use with compatible accessories and low-level DC measurements

• Min, Max, Average and Inrush recording to capture variations automatically

• Inrush measurement helps capture motor starting current

• VFD low-pass filter supports accurate measurements on non-linear signals

• Fluke Connect® allows wireless logging, trending and monitoring from a compatible smart device

• iFlex® probe improves access around large conductors and tight spaces

• 34mm jaw opening for everyday clamp measurements

• Backlit display for improved visibility in darker work areas

• CAT III 1000V and CAT IV 600V safety rating

• Supplied with iFlex® probe, TL75 test leads, TPAK magnetic hanger, batteries and soft case

Specifications

• Brand: Fluke

• Product Number: FLU376FC

• Model: Fluke 376 FC

• Product Name: Fluke 376 FC True-RMS Clamp Meter with iFlex®

• Tool Type: True-RMS AC/DC Clamp Meter

• AC Current via Jaw: Up to 999.9A

• DC Current via Jaw: Up to 999.9A

• AC Current via iFlex® Flexible Current Probe: Up to 2500A

• AC Voltage Range: Up to 1000V

• DC Voltage Range: Up to 1000V

• DC Millivolt Range: 500.0mV

• Resistance Range: Up to 60kΩ

• Capacitance Range: Up to 1000µF

• Frequency Range via Jaw: 5Hz to 500Hz

• Frequency Range via iFlex® Probe: 5Hz to 500Hz

• AC Response: True-RMS

• Recording Functions: Min, Max, Average and Inrush

• Continuity Detection: Yes

• VFD Low-Pass Filter: Yes

• Wireless Connectivity: Fluke Connect® compatible

• Jaw Opening: 34mm

• Flexible Current Probe Diameter: 7.5mm

• Flexible Current Probe Cable Length: 1.8m

• Maximum Voltage Between Any Terminal and Earth Ground: 1000V

• Safety Rating: CAT III 1000V / CAT IV 600V

• Safety Standards: IEC 61010-1, IEC 61010-2-032 and IEC 61010-2-033

• IP Rating: IP30, non-operating

• Battery Type: 2 x AA batteries

• Operating Temperature: -10°C to 50°C

• Storage Temperature: -40°C to 60°C

• Operating Altitude: 2000m

• Dimensions: 249 x 85 x 45mm

• Weight: 395g

• UPC / Barcode: 095969798396

• Unit of Measure: Each

• Application: AC/DC current measurement, high-current testing, voltage checks, frequency testing, capacitance testing, resistance measurement, continuity checks, inrush measurement and electrical troubleshooting

Ideal For

• Professional electricians

• Industrial electricians

• HVAC technicians

• Refrigeration technicians

• Electrical maintenance workers

• Industrial service technicians

• Motor and pump troubleshooting

• Variable frequency drive and non-linear load testing

• Switchboard and control panel testing

• High-current measurements using the iFlex® flexible current probe

• Capturing motor starting current using Inrush recording

• Logging and trending measurements with Fluke Connect®

• Commercial and industrial electrical fault finding

• Trade tool kits, service bags and maintenance vehicles

Professional Fluke Connect® Clamp Meter for Industrial Troubleshooting

The Fluke 376 FC True-RMS Clamp Meter with iFlex® is built for tradespeople who need advanced clamp meter performance for demanding electrical diagnostics. With AC/DC current to 999.9A through the jaw, iFlex® AC current measurement to 2500A, 1000V AC/DC voltage capability, inrush recording, VFD filtering and Fluke Connect® wireless logging, it provides the flexibility needed for complex troubleshooting.

For electricians, HVAC technicians, refrigeration technicians and industrial maintenance teams, the Fluke 376 FC delivers trusted Fluke accuracy, high-current measurement capability, remote monitoring convenience and CAT III 1000V / CAT IV 600V protection for professional service and maintenance work.