VIPER

VIPER Coil Coating - 432g

$103.95 AUD (Inc GST)
RT640A

Pickup available at 36 Enterprise Drive

Usually ready in 24 hours

VIPER Coil Coating - 432g

RT640A

 

Viper Coil Coating is the same formulation as supplied to OEMs and custom heat exchanger manufacturers. It is the toughest and longest-lasting coating you will ever use, able to protect coils, heat exchangers, fins and other metal surfaces from salt water and many other chemically corrosive environments that face industries such as maritime and mining. The solvent-borne clear coating meets all State and Federal VOC regulations, bonds to all metal surfaces and withstands continuous temperatures to 205°C.



 

Used Where:

HVACR condensers, HVACR evaporators, radiators, intercoolers, EV thermal management heat exchangers.

 

Directions:

1. Always wear protective gloves, goggles and clothing. Use in well ventilated areas and when ambient temperatures are above 10°C and below 32°C.

2. Before applying Viper Coil Coating, clean coil with Viper Brite (Part # RT300G) to remove all surface oxidation.

3. Rinse and allow surface to dry.

4. Hold can approx. 50 mm away, apply a single coat to the front and back of the coil and all metal parts. Coat all surrounding metal for extra protection.

5. Wait 30 – 60 m


WARRANTY

12 months from date of purchase.
*All warranties exclude consumables such as; filters, gaskets, leads, batteries, fuses, sensors, cases etc*