VIPER

VIPER Heavy Duty - 3.785L

$126.00 AUD (Inc GST)
RT390G

Pickup available at 36 Enterprise Drive

Usually ready in 24 hours

VIPER Heavy Duty - 3.785L

RT390G

Use Viper Heavy Duty as an alternative to hazardous acid or alkaline cleaners for unbelievable multipurpose cleaning and degreasing performance on coils, heat exchangers and other surfaces. It is non-flammable, contains no hazardous ingredients, produces no toxic fumes, is non-irritating, pH neutral, biodegradable and food industry compliant (NSF certified).

 

Used Where:

HVACR condensers, HVACR evaporators, radiators, intercoolers, EV thermal management heat exchangers, drivetrain hardware and components, engine bays AHU rooms, cold rooms and refrigerated trailers.

 

Directions:

1. Use our Viper Foam Gun (Part # RT300S) or the Viper Foam Sprayer (Part # RT301S). Remember to dilute the concentrate to the desired ratio when using the Viper Foam Sprayer (Part # RT301S).

2. Fully saturate the coil with with foam or fluid.

3. Wait 5 – 10 minutes to allow foam to liquify and loosen dirt, grease and grime.

4. Condenser coils: Light rinse if water is available. No rinse at 20:1 dilution ration or higher.

5. Evaporator coils: No rinse required if dilution is greater than 10:1 and debris will not cause a condensate drain and pan blockage issue.

6. In food processing areas; Remove or protect all food and packaging materials. Rinse with potable water after use if contact with food or packaging materials is expected.

7. Effectively destroys heavy organic or synthetic contaminants such as mould, petroleum-based grease, dirt and natural fats

 


 

WARRANTY

12 months from date of purchase.
*All warranties exclude consumables such as; filters, gaskets, leads, batteries, fuses, sensors, cases etc*